To print from your device, you will need to set up Mobility Print or Print Deploy Client (when at school)

NOTE: Links Below will only work at School

PC - Student Personal Device

1. Download and install Papercut Deploy Client from this link or the icon below

2. Sign-in with your short username and password

3. You are ready to print - Print to BYOD_Findme : 

PC - Staff Laptop or Student Workstation (Staff laptops with label STF...)

1. Print to BYOD_Findme : 

2. BYOD_Findme not there - Sign-in to Papercut Client

Click on Task bar - Up arrow and choose View my printers

with your short username and password

3. You are ready to print - Print to BYOD_Findme : 

Printing from Mac

System Preferences > Printers and Scanners > Add BYOD_find_me. > Print document > When prompted - use your school username and password


Issues with printing to Letter

Your printer may have a default size of letter setup. You can check and change this. Check the paper size is A4 and not Letter (this can cause you problems later if left as Letter)

Printing from Mac - Full Instructions

  1. Navigate to System Preferences > Printers and Scanners.
  2. Click the  icon under the Printers List. The Add dialog is displayed. It displays a list of all of the discovered printers on the network.
  3. Select the BYOD_find_me printer. 
  4. At the bottom of the dialog box, check that Use is set to Secure AirPrint.
  5. If Secure AirPrint isn’t displayed:
    1. Close the Add dialog.
    2. Disconnect from the network, then reconnect to it again.
    3. Check if you can see Secure AirPrint now. If you can’t, contact your System Administrator.
  6. Click Add.
  7. Print your document. When prompted, enter your School username (short version) and password.

Device Requirements

Mobility Print supports macOS Yosemite+.

Archive: PC Mobility Print

Printing from Other Devices

It is possible to print from most BYOD devices: Click here for all instructions